Page 56 - Tuindeco EN Catalogue 2019
P. 56

   GaRDen TIMbeR
Hardwood timber
Widest side 2x V-groove, rounded angles
2.45730 4.4x6.8x305cm
slat, hardwood
Planed with rounded angles
2.46167 1.6x7.0x180cm 2.46168 1.6x7.0x210cm
                                                  Hardwood timber
Planed, relief, rounded angles
2.45739 4.4x6.8x400cm 2.45742 4.4x6.8x430cm 2.45930 4.4x8.8x305cm 2.45939 4.4x8.8x400cm 2.45942 4.4x8.8x430cm 2.51430 4.4x14.5x305cm 2.51439 4.4x14.5x400cm 2.51442 4.4x14.5x430cm 2.51448 4.4x14.5x490cm
2.46110 1.2x9.0x180cm
Hardwood girder
                          Girder, larch/douglas
Sharp-edged and fine sawn
This can also be used as a foundation girder.
2.51030 4.0x9.0x300cm 2.41930 4.0x20.0x300cm 2.41940 4.0x20.0x400cm 2.41950 4.0x20.0x500cm
Plank, larch/douglas
Unplaned, fresh sawn, core-free, undried, top quality, sharp-edged and
Planed, dried, core-free, top quality, rounded angles and untreated 45.8045 4.0x6.0x300cm 45.8046 4.0x6.0x400cm 45.8042 4.5x7.0x300cm 45.8040 4.5x7.0x400cm 45.8041 4.5x7.0x500cm 45.8050 4.5x9.0x400cm 45.8051 4.5x9.0x500cm
untreated
45.1901 2.8x3.6x400cm 45.0043 4.5x7.5x300cm 45.0044 4.5x7.5x400cm 45.0045 4.5x7.5x500cm 45.0041 5.0x10.0x300cm 45.0030 5.0x10.0x400cm 45.0040 5.0x10.0x500cm 45.0009 5.0x15.0x300cm 45.0010 5.0x15.0x400cm 45.0015 5.0x15.0x500cm 45.0065 6.3x15.0x500cm 45.0068 6.3x17.5x305cm 45.0069 6.3x17.5x425cm 45.0067 6.3x17.5x500cm 45.0054 7.0x20.0x400cm 45.0055 7.0x20.0x500cm 45.0056 7.0x20.0x600cm 45.0063 10.0x20.0x300cm 45.0062 10.0x20.0x400cm 45.0064 10.0x20.0x500cm 45.0061 10.0x20.0x600cm
                 larch/douglas wooden pegs
For concealing screw holes
pfs+ constructieschroeven
45.8001 4.5x14.5x300cm 45.8002 4.5x14.5x400cm 45.8010 4.5x14.5x500cm 45.8005 4.5x16.0x300cm 45.8006 4.5x16.0x400cm 45.8069 6.5x16.0x400cm 45.8070 6.5x16.0x500cm 45.8071 6.5x16.0x600cm
42.9009 1.6x1.6x4.5cm
Deze revolutionaire constructieschroef met flenskop en TX opname is de ideale schroef voor houten constructies, zoals bijvoorbeeld houtskeletbouw,
carports, etc. De grote kop zorgt voor een zeer hoge doortrekweerstand.
art.nr. ΓΈ
39.0401 8
39.0402 8
39.0403 8
39.0404 8
39.0405 8
39.0406 8
39.0407 8
39.0408 8
39.0409 8
39.0410 8
39.0411 8
39.0412 8
39.0413 8
39.0414 8
l bit
80 Tx 40 p/st 100 Tx 40 p/st 120 Tx 40 p/st 140 Tx 40 p/st 160 Tx 40 p/st 180 Tx 40 p/st 200 Tx 40 p/st 220 Tx 40 p/st 240 Tx 40 p/st 260 Tx 40 p/st 280 Tx 40 p/st 300 Tx 40 p/st 340 Tx 40 p/st 380 Tx 40 p/st
              GZ
EN 14592
         Tuindeco catalogue 2019 56
www.tuindeco.com
yellow zinc pl.
 HoUTconsTRUcTIescHRoef
met flenskop, T-drive
Met freesribben op de schacht, grove draad, speciaal snijpunt type 17, gehard en gewaxt














































   54   55   56   57   58